INSTALLING THE AXLE: (Refer to the COM200 AXLE MOUNTING diagram) Raise one side of the COM200 Grill Body (32) approximately 6 inches and securely block in place. Repeat with the …

Assembly of the grill is required. Follow the assembly instruction provided in the TFS60LZAC packaging. Removal of the Porcelain Grills, Drip Pan, Heat Baffle, and Grease Bucket will be required for initial …

MOUNTING THE HANDLE TO THE LID: Insert .250 lock washers (18), .250 flat washers (19) onto 1/4-20 bolt (17) and insert into hole on the inside of the lid. Then align the handle to the screw and insert …

Insert the auger motor shaft into the end of the tube on the auger making sure the holes align. Insert the 6-32 socket screw through the tube on the auger and through the shaft. Insert the nut onto 6-32 lock …

Before hopper installation ensure that the connector for the temperature probe is inserted into hole located on the right side of the hopper mounting face. Insert hopper burner assembly (N) onto BBQ …

PELLETS Creating 100% food-grade hardwood pellets comes naturally to Traeger. Our four U.S. mills process pure hardwood, blended for the perfect balance of smoke to heat and superior quality you …

Plug the male Molex connector on the fan motor into the female connector on the controller with the orange and white wires. Use the included wire ties to secure the wires so they do not interfere with …